KVR16LS11/8
8GB 2Rx8 1G x 64-Bit PC3L-12800 CL11 204-Pin SODIMM
ValueRAM's 1G x 64-bit (8GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8, low voltage, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This
204-pin SODIMM uses gold contact fingers.
Features
€¢ JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
€¢ VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
€¢ 800MHz fCK for 1600Mb/sec/pin
€¢ 8 independent internal bank
€¢ Programmable CAS Latency: 11, 10, 9, 8, 7, 6
€¢ Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
€¢ 8-bit pre-fetch
€¢ Burst Length: 8 (Interleave without any limit, sequential with starting address €œ000€ only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
€¢ Bi-directional Differential Data Strobe
€¢ Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
€¢ On Die Termination using ODT pin
€¢ Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
€¢ Asynchronous Reset
€¢ PCB: Height 1.18€ (30mm), double sided component
Description
Specification
-
Series: Kingston ValueRAM
-
DDR Type: DDR3 SODIMM
-
Size: 1 x 8GB
-
Individual Module Size: 8GB
-
Speed: 1600 MHz
-
Compliance: PC3L-12800
-
Pins: 204-pin
-
CAS Latency: CL11
-
Data Integrity Check: Non-ECC
-
Low Voltage: Yes
-
Voltage: 1.35V
-
Additional Information: Unbuffered
-
Package Type: Blister Pack
-
Package Weight: 0.0690 kg
-
Warranty: Lifetime
